- Fixed the issue that %APPDATA% isn't replaced if Rainmeter runs as different user.
- Some stability improvements for activating/deactivating configs.
Usage:
Group=group1 | group2 | group3
* Concatenate group with the "|" if you'd like to assign multiple groups.
- Added !Bangs for Group. (!RainmeterShowMeterGroup, !RainmeterHideMeterGroup, !RainmeterToggleMeterGroup, !RainmeterEnableMeasureGroup, !RainmeterDisableMeasureGroup, !RainmeterToggleMeasureGroup)
Usage:
!RainmeterShowMeterGroup [group] (Config)
!RainmeterHideMeterGroup [group] (Config)
!RainmeterToggleMeterGroup [group] (Config)
!RainmeterEnableMeasureGroup [group] (Config)
!RainmeterDisableMeasureGroup [group] (Config)
!RainmeterToggleMeasureGroup [group] (Config)
- Modified logging feature. Added new "Logging" menu to the context menu.
- Added the manifest to Rainmeter.exe to apply visual style to button etc.
2) Change to version checking:
* CheckVersion= setting depreciated. Removed from "About" dialog and automatically ignored and removed from Rainmeter.ini at Rainmeter start.
* New DisableVersionCheck= (1/0) setting added, which now changes the default from "don't check version" to "do check version" unless this is set to "1"
1) Added Gnometer as one of the default skins, including two themese (Gnometer and Gnometer Preview)
2) Removed Tranquil skins
3) Added RainBackup in \Addons and to start menu
4) Changes to Rainstaller to use default header .bmp file if the author does not provide one in the .rmskin.
5) Changes to Rainmeter.cpp to handle Gnometer as one of the new default skins
6) Changes to the Rainmeter installation program to allow selection of default skin / theme (Gnometer or Enigma)
- Fixed a problem that StyleTemplate affects to Meters which have no relation.
- Added a workaround to avoid the "IniFileMapping" function when reading skins.
- Some small code cosmetics.
- Added !RainmeterSetTransparency, !RainmeterShowFade, !RainmeterHideFade, !RainmeterToggleFade.
- Added the function to log the installed font families to the log file when Debug=1 is set.
- Added the workaround for issue 145. The wrong drawing position was fixed when AntiAlias=0 is set.
For instance:
[MeasureCPU]
Measure=CPU
[MeasureCPU1]
Measure=CPU
Processor=1
[MeasureCPU2]
Measure=CPU
Processor=2
MeasureCPU returns the average of the CPU usage across all core/processors. This is same as Processor=0.
MeasureCPU1/2 returns the CPU usage of each core/processor.
-----
- Fixed the problem that the correct value is not returned if the Interface=0 in NetIn/NetOut/NetTotal measure. The cause of this problem is because the value of all filter devices is summed in Vista or newer.
-----
- Added the option (Debug) for debug logging. This must be put under [Rainmeter]-section in Rainmeter.ini.
This option specifies whether extra debugging log from Rainmeter.dll is output to Rainmeter.log.
[Rainmeter]
Debug=1
Default is 0.
-----
- Application: Fixed a wrong return value type from MainWndProc.
This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.)
-----
* Added the "Display Monitor" submenu in [Skins Menu]-[Position].
These menus convert the present position to the relative position from the specified monitor.
(But the meter window doesn't move to the specified monitor area immediately. Only converts.)
- "Use default: Primary monitor" removes the @-directive from WindowX/Y.
- @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx)
- If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini.
AutoSelectScreen
If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0.
-----
* Added the variables for multiple display monitors and the virtual screen.
All X/Y positions are represented in the virtual screen coordinates.
The following variables are for the virtual screen.
#VSCREENAREAX# is the X-position of the left-side of the virtual screen.
#VSCREENAREAY# is the Y-position of the top-side of the virtual screen.
#VSCREENAREAWIDTH# is the width of the virtual screen.
#VSCREENAREAHEIGHT# is the height of the virtual screen.
The following variables are for the PRESENT monitor.
Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor.
#WORKAREAX# is the X-position of the left-side of the work area.
#WORKAREAY# is the Y-position of the top-side of the work area.
#WORKAREAWIDTH# is the width of the work area.
#WORKAREAHEIGHT# is the height of the work area.
#SCREENAREAX# is the X-position of the left-side of the monitor screen.
#SCREENAREAY# is the Y-position of the top-side of the monitor screen.
#SCREENAREAWIDTH# is the width of the display resolution.
#SCREENAREAHEIGHT# is the height of the display resolution.
The following variables are for the PRIMARY monitor.
#PWORKAREAX# is the X-position of the left-side of the work area.
#PWORKAREAY# is the Y-position of the top-side of the work area.
#PWORKAREAWIDTH# is the width of the work area.
#PWORKAREAHEIGHT# is the height of the work area.
#PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0)
#PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0)
#PSCREENAREAWIDTH# is the width of the display resolution.
#PSCREENAREAHEIGHT# is the height of the display resolution.
The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...)
#WORKAREAX@n# is the X-position of the left-side of the work area.
#WORKAREAY@n# is the Y-position of the top-side of the work area.
#WORKAREAWIDTH@n# is the width of the work area.
#WORKAREAHEIGHT@n# is the height of the work area.
#SCREENAREAX@n# is the X-position of the left-side of the monitor screen.
#SCREENAREAY@n# is the Y-position of the top-side of the monitor screen.
#SCREENAREAWIDTH@n# is the width of the display resolution.
#SCREENAREAHEIGHT@n# is the height of the display resolution.
-----
* Other related changes:
- Fixed the problem that the primary monitor isn't recognized correctly.
- Fixed the problem that the information of the multiple display monitors is refreshed excessively.
- For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables.
- Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates.
- Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".)
-----
* Other changes:
- When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed.
- Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead.
- Fixed the problem that the Meter's hit-test code checks outside the area.
- Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
!RainmeterRefreshApp
Does a full refresh of all skins and reloads the list of configs and Rainmeter.ini settings. This is the same as "Refresh All" from the system tray context menu. Is not the same as !RainmeterRefresh [config | *] as it can be used to make Rainmeter "see" a new folder added to \Skins by the user or a process. Note: This was added mostly to better support RainBrowser when a user adds a downloaded config while using RainBrowser.
- Minor changes of ConvertToXXX(): Get an appropriate buffer size to convert the string. And using [] when deleting arrays.
- Fixed a few memory leaks.
- It's now possible to send the !BANG command when all windows are "On Desktop". (Rainmeter.exe and WebParser)
If there is a file called Default.ini in the program folder it will be used as the default settings file for new users.
The location of the settings file (rainmeter.ini) can be defined as a command line argument.
Added the revision number to the about dialog (use UpdateRevision.py to update it).
Added a check to the startup which verifies that the rainmeter.ini is writable.
The skin folder can be opened from the context menu.
