rainmeter-studio/Library/ConfigParser.cpp

1405 lines
35 KiB
C++
Raw Normal View History

2009-02-10 18:37:48 +00:00
/*
Copyright (C) 2004 Kimmo Pekkola
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
2009-02-10 18:37:48 +00:00
*/
#include "StdAfx.h"
2009-02-10 18:37:48 +00:00
#include "ConfigParser.h"
#include "MathParser.h"
2009-02-10 18:37:48 +00:00
#include "Litestep.h"
#include "Rainmeter.h"
#include "System.h"
#include "Measure.h"
2011-09-24 13:10:31 +00:00
#include "resource.h"
2009-02-10 18:37:48 +00:00
extern CRainmeter* Rainmeter;
using namespace Gdiplus;
std::unordered_map<std::wstring, std::wstring> CConfigParser::c_MonitorVariables;
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
2009-02-10 18:37:48 +00:00
/*
** The constructor
**
*/
CConfigParser::CConfigParser() :
m_LastReplaced(false),
2011-11-01 04:56:46 +00:00
m_LastDefaultUsed(false),
m_LastValueDefined(false),
m_CurrentSection()
2009-02-10 18:37:48 +00:00
{
}
/*
** The destructor
**
*/
CConfigParser::~CConfigParser()
{
}
2012-05-21 11:19:25 +00:00
void CConfigParser::Initialize(const std::wstring& filename, CMeterWindow* meterWindow, LPCTSTR config, const std::wstring* resourcePath)
2009-02-10 18:37:48 +00:00
{
m_Measures.clear();
m_Sections.clear();
m_Values.clear();
m_BuiltInVariables.clear();
m_Variables.clear();
2011-11-01 04:56:46 +00:00
m_StyleTemplate.clear();
m_LastUsedStyle.clear();
m_LastReplaced = false;
m_LastDefaultUsed = false;
m_LastValueDefined = false;
m_CurrentSection = NULL;
// Set the built-in variables. Do this before the ini file is read so that the paths can be used with @include
2012-05-21 11:19:25 +00:00
SetBuiltInVariables(filename, resourcePath, meterWindow);
ResetMonitorVariables(meterWindow);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
2011-11-10 13:44:19 +00:00
CSystem::UpdateIniFileMappingList();
2012-05-21 11:19:25 +00:00
ReadIniFile(filename, config);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
ReadVariables();
2011-07-15 16:54:47 +00:00
// Clear and minimize
2011-12-04 22:18:40 +00:00
m_FoundSections.clear();
m_ListVariables.clear();
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
}
2012-05-21 11:19:25 +00:00
void CConfigParser::SetBuiltInVariables(const std::wstring& filename, const std::wstring* resourcePath, CMeterWindow* meterWindow)
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
2012-05-20 13:12:13 +00:00
SetBuiltInVariable(L"PROGRAMPATH", Rainmeter->GetPath());
SetBuiltInVariable(L"PROGRAMDRIVE", Rainmeter->GetDrive());
SetBuiltInVariable(L"SETTINGSPATH", Rainmeter->GetSettingsPath());
SetBuiltInVariable(L"SKINSPATH", Rainmeter->GetSkinPath());
SetBuiltInVariable(L"PLUGINSPATH", Rainmeter->GetPluginPath());
SetBuiltInVariable(L"CURRENTPATH", CRainmeter::ExtractPath(filename));
SetBuiltInVariable(L"ADDONSPATH", Rainmeter->GetAddonPath());
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
if (meterWindow)
{
SetBuiltInVariable(L"CURRENTFILE", meterWindow->GetSkinIniFile());
SetBuiltInVariable(L"CURRENTCONFIG", meterWindow->GetSkinName());
2011-07-18 00:32:09 +00:00
SetBuiltInVariable(L"ROOTCONFIGPATH", meterWindow->GetSkinRootPath());
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
}
SetBuiltInVariable(L"CRLF", L"\n");
2012-05-19 15:16:04 +00:00
const std::wstring CURRENTSECTION = L"CURRENTSECTION";
SetBuiltInVariable(CURRENTSECTION, L"");
2011-12-09 03:28:19 +00:00
m_CurrentSection = &((*m_BuiltInVariables.find(CURRENTSECTION)).second); // shortcut
2012-05-21 13:41:07 +00:00
if (resourcePath)
{
SetVariable(L"@", *resourcePath);
}
2009-02-10 18:37:48 +00:00
}
/*
** Sets all user-defined variables.
2009-02-10 18:37:48 +00:00
**
*/
void CConfigParser::ReadVariables()
{
2011-11-12 15:36:05 +00:00
std::list<std::wstring>::const_iterator iter = m_ListVariables.begin();
for ( ; iter != m_ListVariables.end(); ++iter)
2009-02-10 18:37:48 +00:00
{
SetVariable((*iter), ReadString(L"Variables", (*iter).c_str(), L"", false));
2009-02-10 18:37:48 +00:00
}
}
2012-04-06 12:29:41 +00:00
/*
** Sets a new value for the variable. The DynamicVariables must be set to 1 in the
** meter/measure for the changes to be applied.
2011-03-29 19:21:57 +00:00
**
*/
void CConfigParser::SetVariable(std::unordered_map<std::wstring, std::wstring>& variables, const std::wstring& strVariable, const std::wstring& strValue)
{
2011-01-23 14:24:34 +00:00
// LogWithArgs(LOG_DEBUG, L"Variable: %s=%s (size=%i)", strVariable.c_str(), strValue.c_str(), (int)variables.size());
2012-05-19 15:16:04 +00:00
const std::wstring strTmp = StrToUpper(strVariable);
2011-12-09 03:28:19 +00:00
variables[strTmp] = strValue;
}
void CConfigParser::SetVariable(std::unordered_map<std::wstring, std::wstring>& variables, const WCHAR* strVariable, const WCHAR* strValue)
{
// LogWithArgs(LOG_DEBUG, L"Variable: %s=%s (size=%i)", strVariable.c_str(), strValue.c_str(), (int)variables.size());
2012-05-19 15:16:04 +00:00
const std::wstring strTmp = StrToUpper(strVariable);
2011-12-09 03:28:19 +00:00
variables[strTmp] = strValue;
}
2012-04-06 12:29:41 +00:00
/*
** Gets a value for the variable. Returns true if variable found.
2011-03-29 19:21:57 +00:00
**
*/
bool CConfigParser::GetVariable(const std::wstring& strVariable, std::wstring& strValue)
{
2012-05-19 15:16:04 +00:00
const std::wstring strTmp = StrToUpper(strVariable);
// #1: Built-in variables
std::unordered_map<std::wstring, std::wstring>::const_iterator iter = m_BuiltInVariables.find(strTmp);
if (iter != m_BuiltInVariables.end())
{
2010-08-24 01:13:27 +00:00
// Built-in variable found
strValue = (*iter).second;
return true;
}
// #2: Monitor variables
iter = c_MonitorVariables.find(strTmp);
if (iter != c_MonitorVariables.end())
{
2010-08-24 01:13:27 +00:00
// SCREENAREA/WORKAREA variable found
strValue = (*iter).second;
return true;
}
2010-08-24 01:13:27 +00:00
// #3: User-defined variables
iter = m_Variables.find(strTmp);
if (iter != m_Variables.end())
{
2010-08-24 01:13:27 +00:00
// Variable found
strValue = (*iter).second;
return true;
}
// Not found
return false;
2009-02-10 18:37:48 +00:00
}
void CConfigParser::ResetMonitorVariables(CMeterWindow* meterWindow)
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
// Set the SCREENAREA/WORKAREA variables
if (c_MonitorVariables.empty())
{
SetMultiMonitorVariables(true);
}
// Set the SCREENAREA/WORKAREA variables for present monitor
SetAutoSelectedMonitorVariables(meterWindow);
}
/*
** Sets new values for the SCREENAREA/WORKAREA variables.
2011-03-29 19:21:57 +00:00
**
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
*/
void CConfigParser::SetMultiMonitorVariables(bool reset)
{
WCHAR buffer[32];
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
RECT workArea, scrArea;
if (!reset && c_MonitorVariables.empty())
{
reset = true; // Set all variables
}
SystemParametersInfo(SPI_GETWORKAREA, 0, &workArea, 0);
_itow_s(workArea.left, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"WORKAREAX", buffer);
SetMonitorVariable(L"PWORKAREAX", buffer);
_itow_s(workArea.top, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"WORKAREAY", buffer);
SetMonitorVariable(L"PWORKAREAY", buffer);
_itow_s(workArea.right - workArea.left, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"WORKAREAWIDTH", buffer);
SetMonitorVariable(L"PWORKAREAWIDTH", buffer);
_itow_s(workArea.bottom - workArea.top, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"WORKAREAHEIGHT", buffer);
SetMonitorVariable(L"PWORKAREAHEIGHT", buffer);
if (reset)
{
scrArea.left = 0;
scrArea.top = 0;
scrArea.right = GetSystemMetrics(SM_CXSCREEN);
scrArea.bottom = GetSystemMetrics(SM_CYSCREEN);
_itow_s(scrArea.left, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"SCREENAREAX", buffer);
SetMonitorVariable(L"PSCREENAREAX", buffer);
_itow_s(scrArea.top, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"SCREENAREAY", buffer);
SetMonitorVariable(L"PSCREENAREAY", buffer);
_itow_s(scrArea.right - scrArea.left, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"SCREENAREAWIDTH", buffer);
SetMonitorVariable(L"PSCREENAREAWIDTH", buffer);
_itow_s(scrArea.bottom - scrArea.top, buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"SCREENAREAHEIGHT", buffer);
SetMonitorVariable(L"PSCREENAREAHEIGHT", buffer);
_itow_s(GetSystemMetrics(SM_XVIRTUALSCREEN), buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"VSCREENAREAX", buffer);
_itow_s(GetSystemMetrics(SM_YVIRTUALSCREEN), buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"VSCREENAREAY", buffer);
_itow_s(GetSystemMetrics(SM_CXVIRTUALSCREEN), buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"VSCREENAREAWIDTH", buffer);
_itow_s(GetSystemMetrics(SM_CYVIRTUALSCREEN), buffer, 10);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(L"VSCREENAREAHEIGHT", buffer);
}
if (CSystem::GetMonitorCount() > 0)
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
const MULTIMONITOR_INFO& multimonInfo = CSystem::GetMultiMonitorInfo();
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
const std::vector<MONITOR_INFO>& monitors = multimonInfo.monitors;
for (size_t i = 0, isize = monitors.size(); i < isize; ++i)
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
WCHAR buffer2[64];
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
const RECT work = (monitors[i].active) ? monitors[i].work : workArea;
_itow_s(work.left, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"WORKAREAX@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
_itow_s(work.top, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"WORKAREAY@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
_itow_s(work.right - work.left, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"WORKAREAWIDTH@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
_itow_s(work.bottom - work.top, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"WORKAREAHEIGHT@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
if (reset)
{
const RECT screen = (monitors[i].active) ? monitors[i].screen : scrArea;
_itow_s(screen.left, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"SCREENAREAX@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
_itow_s(screen.top, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"SCREENAREAY@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
_itow_s(screen.right - screen.left, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"SCREENAREAWIDTH@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
_itow_s(screen.bottom - screen.top, buffer, 10);
_snwprintf_s(buffer2, _TRUNCATE, L"SCREENAREAHEIGHT@%i", (int)i + 1);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
SetMonitorVariable(buffer2, buffer);
}
}
}
}
/*
** Sets new SCREENAREA/WORKAREA variables for present monitor.
2011-03-29 19:21:57 +00:00
**
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
*/
void CConfigParser::SetAutoSelectedMonitorVariables(CMeterWindow* meterWindow)
{
if (meterWindow)
{
WCHAR buffer[32];
if (CSystem::GetMonitorCount() > 0)
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
int w1, w2, s1, s2;
int screenIndex;
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
const MULTIMONITOR_INFO& multimonInfo = CSystem::GetMultiMonitorInfo();
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
const std::vector<MONITOR_INFO>& monitors = multimonInfo.monitors;
// Set X / WIDTH
screenIndex = multimonInfo.primary;
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
if (meterWindow->GetXScreenDefined())
{
int i = meterWindow->GetXScreen();
if (i >= 0 && (i == 0 || i <= (int)monitors.size() && monitors[i-1].active))
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
screenIndex = i;
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
}
}
if (screenIndex == 0)
{
s1 = w1 = multimonInfo.vsL;
s2 = w2 = multimonInfo.vsW;
}
else
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
w1 = monitors[screenIndex-1].work.left;
w2 = monitors[screenIndex-1].work.right - monitors[screenIndex-1].work.left;
s1 = monitors[screenIndex-1].screen.left;
s2 = monitors[screenIndex-1].screen.right - monitors[screenIndex-1].screen.left;
}
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
_itow_s(w1, buffer, 10);
SetBuiltInVariable(L"WORKAREAX", buffer);
_itow_s(w2, buffer, 10);
SetBuiltInVariable(L"WORKAREAWIDTH", buffer);
_itow_s(s1, buffer, 10);
SetBuiltInVariable(L"SCREENAREAX", buffer);
_itow_s(s2, buffer, 10);
SetBuiltInVariable(L"SCREENAREAWIDTH", buffer);
// Set Y / HEIGHT
screenIndex = multimonInfo.primary;
if (meterWindow->GetYScreenDefined())
{
int i = meterWindow->GetYScreen();
if (i >= 0 && (i == 0 || i <= (int)monitors.size() && monitors[i-1].active))
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
{
screenIndex = i;
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
}
}
if (screenIndex == 0)
{
s1 = w1 = multimonInfo.vsL;
s2 = w2 = multimonInfo.vsW;
}
else
{
w1 = monitors[screenIndex-1].work.top;
w2 = monitors[screenIndex-1].work.bottom - monitors[screenIndex-1].work.top;
s1 = monitors[screenIndex-1].screen.top;
s2 = monitors[screenIndex-1].screen.bottom - monitors[screenIndex-1].screen.top;
}
_itow_s(w1, buffer, 10);
SetBuiltInVariable(L"WORKAREAY", buffer);
_itow_s(w2, buffer, 10);
SetBuiltInVariable(L"WORKAREAHEIGHT", buffer);
_itow_s(s1, buffer, 10);
SetBuiltInVariable(L"SCREENAREAY", buffer);
_itow_s(s2, buffer, 10);
SetBuiltInVariable(L"SCREENAREAHEIGHT", buffer);
}
else
{
RECT r;
// Set default WORKAREA
SystemParametersInfo(SPI_GETWORKAREA, 0, &r, 0);
_itow_s(r.left, buffer, 10);
SetBuiltInVariable(L"WORKAREAX", buffer);
_itow_s(r.top, buffer, 10);
SetBuiltInVariable(L"WORKAREAY", buffer);
_itow_s(r.right - r.left, buffer, 10);
SetBuiltInVariable(L"WORKAREAWIDTH", buffer);
_itow_s(r.bottom - r.top, buffer, 10);
SetBuiltInVariable(L"WORKAREAHEIGHT", buffer);
// Set default SCREENAREA
r.left = 0;
r.top = 0;
r.right = GetSystemMetrics(SM_CXSCREEN);
r.bottom = GetSystemMetrics(SM_CYSCREEN);
_itow_s(r.left, buffer, 10);
SetBuiltInVariable(L"SCREENAREAX", buffer);
_itow_s(r.top, buffer, 10);
SetBuiltInVariable(L"SCREENAREAY", buffer);
_itow_s(r.right - r.left, buffer, 10);
SetBuiltInVariable(L"SCREENAREAWIDTH", buffer);
_itow_s(r.bottom - r.top, buffer, 10);
SetBuiltInVariable(L"SCREENAREAHEIGHT", buffer);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
}
}
}
2012-04-06 12:29:41 +00:00
/*
** Replaces environment and internal variables in the given string.
2011-03-29 19:21:57 +00:00
**
*/
bool CConfigParser::ReplaceVariables(std::wstring& result)
{
bool replaced = false;
CRainmeter::ExpandEnvironmentVariables(result);
* Changed the way to get the information of the multiple display monitors. This change brings the order of monitors close to the order of "Display Properties" due to using EnumDisplayDevices and EnumDisplaySettings instead of EnumDisplayMonitors. (If EnumDisplayDevices failed, EnumDisplayMonitors is used as before.) ----- * Added the "Display Monitor" submenu in [Skins Menu]-[Position]. These menus convert the present position to the relative position from the specified monitor. (But the meter window doesn't move to the specified monitor area immediately. Only converts.) - "Use default: Primary monitor" removes the @-directive from WindowX/Y. - @0(@1, @2, ...) adds the specified monitor number to WindowX/Y. @0 means "The Virtual Screen". (http://msdn.microsoft.com/en-us/library/dd145136%28VS.85%29.aspx) - If "Auto-select based on window position" is checked, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this menu is unchecked. This setting can be manually made in either the [Rainmeter] (all configs) or individual config sections of Rainmeter.ini. AutoSelectScreen If set to 1, the WindowX and WindowY "@n" settings are made automatically based on the position of the meter's window. If a monitor is selected directly using "Display Monitor" in the Rainmeter / skin context menu, this setting is reset to 0. ----- * Added the variables for multiple display monitors and the virtual screen. All X/Y positions are represented in the virtual screen coordinates. The following variables are for the virtual screen. #VSCREENAREAX# is the X-position of the left-side of the virtual screen. #VSCREENAREAY# is the Y-position of the top-side of the virtual screen. #VSCREENAREAWIDTH# is the width of the virtual screen. #VSCREENAREAHEIGHT# is the height of the virtual screen. The following variables are for the PRESENT monitor. Note that these variables automatically change by the WindowX and WindowY "@n" settings. If "@n" is not set, these variables return the value of the primary monitor. #WORKAREAX# is the X-position of the left-side of the work area. #WORKAREAY# is the Y-position of the top-side of the work area. #WORKAREAWIDTH# is the width of the work area. #WORKAREAHEIGHT# is the height of the work area. #SCREENAREAX# is the X-position of the left-side of the monitor screen. #SCREENAREAY# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH# is the width of the display resolution. #SCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the PRIMARY monitor. #PWORKAREAX# is the X-position of the left-side of the work area. #PWORKAREAY# is the Y-position of the top-side of the work area. #PWORKAREAWIDTH# is the width of the work area. #PWORKAREAHEIGHT# is the height of the work area. #PSCREENAREAX# is the X-position of the left-side of the monitor screen. (maybe, always 0) #PSCREENAREAY# is the Y-position of the top-side of the monitor screen. (maybe, always 0) #PSCREENAREAWIDTH# is the width of the display resolution. #PSCREENAREAHEIGHT# is the height of the display resolution. The following variables are for the SPECIFIED monitor. (@n = @1, @2, ...) #WORKAREAX@n# is the X-position of the left-side of the work area. #WORKAREAY@n# is the Y-position of the top-side of the work area. #WORKAREAWIDTH@n# is the width of the work area. #WORKAREAHEIGHT@n# is the height of the work area. #SCREENAREAX@n# is the X-position of the left-side of the monitor screen. #SCREENAREAY@n# is the Y-position of the top-side of the monitor screen. #SCREENAREAWIDTH@n# is the width of the display resolution. #SCREENAREAHEIGHT@n# is the height of the display resolution. ----- * Other related changes: - Fixed the problem that the primary monitor isn't recognized correctly. - Fixed the problem that the information of the multiple display monitors is refreshed excessively. - For DynamicVariables, when display setting or workarea size has been changed, all variables are now updated to apply changed WORKAREA/SCREENAREA variables. - Fixed the problem that the "On Desktop" window isn't dragged correctly when the top-left corner of the virtual screen has negative coordinates. - Changed the way to stick the "On Desktop" window. ("SysListView32/FolderView" is used instead of "Progman/Program Manager".) ----- * Other changes: - When the meter window is draggable and isn't dragged, LeftMouseUpAction is now executed. - Added MouseDoubleClickAction (LeftMouseDoubleClickAction, RightMouseDoubleClickAction, MiddleMouseDoubleClickAction). If MouseDoubleClickAction is empty when mouse button is double-clicked, MouseDownAction is executed instead. - Fixed the problem that the Meter's hit-test code checks outside the area. - Changed the way to set the #CURRENTCONFIG#. (CMeterWindow::GetSkinName() is now used instead of parsing the path.)
2009-12-18 05:58:37 +00:00
if (c_MonitorVariables.empty())
{
SetMultiMonitorVariables(true);
}
// Check for variables (#VAR#)
2011-11-10 13:44:19 +00:00
size_t start = 0, end;
bool loop = true;
2011-03-29 19:21:57 +00:00
do
{
2011-11-10 13:44:19 +00:00
start = result.find(L'#', start);
if (start != std::wstring::npos)
{
2011-11-10 13:44:19 +00:00
size_t si = start + 1;
end = result.find(L'#', si);
if (end != std::wstring::npos)
{
2011-11-10 13:44:19 +00:00
size_t ei = end - 1;
if (si != ei && result[si] == L'*' && result[ei] == L'*')
{
2011-11-10 13:44:19 +00:00
result.erase(ei, 1);
result.erase(si, 1);
start = ei;
}
else
{
2011-11-10 13:44:19 +00:00
std::wstring strVariable = result.substr(si, end - si);
std::wstring strValue;
if (GetVariable(strVariable, strValue))
{
// Variable found, replace it with the value
2011-11-10 13:44:19 +00:00
result.replace(start, end - start + 1, strValue);
start += strValue.length();
replaced = true;
}
else
{
start = end;
}
}
}
else
{
loop = false;
}
}
else
{
loop = false;
}
}
while (loop);
return replaced;
}
2012-04-06 12:29:41 +00:00
/*
** Replaces measures in the given string.
2011-03-29 19:21:57 +00:00
**
2009-02-10 18:37:48 +00:00
*/
bool CConfigParser::ReplaceMeasures(std::wstring& result)
2009-02-10 18:37:48 +00:00
{
bool replaced = false;
2009-02-10 18:37:48 +00:00
// Check for measures ([Measure])
if (!m_Measures.empty())
{
2011-11-10 13:44:19 +00:00
size_t start = 0, end, next;
bool loop = true;
2011-11-10 13:44:19 +00:00
2011-03-29 19:21:57 +00:00
do
{
2011-11-10 13:44:19 +00:00
start = result.find(L'[', start);
if (start != std::wstring::npos)
{
2011-11-10 13:44:19 +00:00
size_t si = start + 1;
end = result.find(L']', si);
if (end != std::wstring::npos)
{
2011-11-10 13:44:19 +00:00
next = result.find(L'[', si);
if (next == std::wstring::npos || end < next)
{
2011-11-10 13:44:19 +00:00
size_t ei = end - 1;
if (si != ei && result[si] == L'*' && result[ei] == L'*')
{
2011-11-10 13:44:19 +00:00
result.erase(ei, 1);
result.erase(si, 1);
start = ei;
}
else
{
2011-11-10 13:44:19 +00:00
std::wstring var = result.substr(si, end - si);
CMeasure* measure = GetMeasure(var);
if (measure)
{
2011-11-10 13:44:19 +00:00
const std::wstring& value = measure->GetStringValue(AUTOSCALE_OFF, 1, -1, false);
// Measure found, replace it with the value
2011-11-10 13:44:19 +00:00
result.replace(start, end - start + 1, value);
start += value.length();
replaced = true;
}
else
{
start = end;
}
}
}
else
{
2011-11-10 13:44:19 +00:00
start = next;
}
}
else
{
loop = false;
}
}
else
{
loop = false;
}
}
while (loop);
}
return replaced;
}
const std::wstring& CConfigParser::ReadString(LPCTSTR section, LPCTSTR key, LPCTSTR defValue, bool bReplaceMeasures)
{
static std::wstring result;
// Clear last status
m_LastUsedStyle.clear();
m_LastReplaced = false;
m_LastDefaultUsed = false;
2011-11-01 04:56:46 +00:00
m_LastValueDefined = false;
2011-10-30 01:39:19 +00:00
const std::wstring strSection = section;
const std::wstring strKey = key;
2011-11-05 09:01:06 +00:00
const std::wstring strDefault = defValue;
2011-11-05 09:01:06 +00:00
const std::wstring& strValue = GetValue(strSection, strKey, strDefault);
if (&strValue == &strDefault)
{
2011-11-05 09:01:06 +00:00
// If the template is defined read the value from there.
if (!m_StyleTemplate.empty())
{
2011-11-05 09:01:06 +00:00
std::vector<std::wstring>::const_reverse_iterator iter = m_StyleTemplate.rbegin();
for ( ; iter != m_StyleTemplate.rend(); ++iter)
{
const std::wstring& strStyleValue = GetValue((*iter), strKey, strDefault);
2011-11-05 09:01:06 +00:00
//LogWithArgs(LOG_DEBUG, L"StyleTemplate: [%s] %s (from [%s]) : strDefault=%s (0x%p), strStyleValue=%s (0x%p)",
// section, key, (*iter).c_str(), strDefault.c_str(), &strDefault, strStyleValue.c_str(), &strStyleValue);
2011-11-05 09:01:06 +00:00
if (&strStyleValue != &strDefault)
{
result = strStyleValue;
m_LastUsedStyle = (*iter);
break;
}
}
}
if (m_LastUsedStyle.empty()) // No template found
{
2011-11-05 09:01:06 +00:00
result = strDefault;
m_LastDefaultUsed = true;
return result;
}
}
else
{
2011-11-05 09:01:06 +00:00
result = strValue;
}
if (!result.empty())
{
2011-11-01 04:56:46 +00:00
m_LastValueDefined = true;
if (result.size() >= 3)
2011-11-24 00:30:56 +00:00
{
if (result.find(L'#') != std::wstring::npos)
{
2011-12-09 03:28:19 +00:00
SetCurrentSection(strSection); // Set temporarily
if (ReplaceVariables(result))
{
m_LastReplaced = true;
}
2011-11-24 00:30:56 +00:00
2011-12-09 03:28:19 +00:00
ClearCurrentSection(); // Reset
}
else
2011-11-24 00:30:56 +00:00
{
CRainmeter::ExpandEnvironmentVariables(result);
2011-11-24 00:30:56 +00:00
}
if (bReplaceMeasures && ReplaceMeasures(result))
{
m_LastReplaced = true;
}
2011-11-01 04:56:46 +00:00
}
}
2009-02-10 18:37:48 +00:00
return result;
}
bool CConfigParser::IsKeyDefined(LPCTSTR section, LPCTSTR key)
{
ReadString(section, key, L"", false);
return !m_LastDefaultUsed;
}
bool CConfigParser::IsValueDefined(LPCTSTR section, LPCTSTR key)
{
ReadString(section, key, L"", false);
return m_LastValueDefined;
}
void CConfigParser::AddMeasure(CMeasure* pMeasure)
{
if (pMeasure)
{
2012-05-19 15:16:04 +00:00
m_Measures[StrToUpper(pMeasure->GetOriginalName())] = pMeasure;
}
}
2009-02-10 18:37:48 +00:00
CMeasure* CConfigParser::GetMeasure(const std::wstring& name)
{
2012-05-19 15:16:04 +00:00
std::unordered_map<std::wstring, CMeasure*>::const_iterator iter = m_Measures.find(StrToUpper(name));
2011-01-23 14:24:34 +00:00
if (iter != m_Measures.end())
{
2011-01-23 14:24:34 +00:00
return (*iter).second;
}
return NULL;
}
std::vector<Gdiplus::REAL> CConfigParser::ReadFloats(LPCTSTR section, LPCTSTR key)
{
std::vector<Gdiplus::REAL> result;
const std::wstring& string = ReadString(section, key, L"");
if (!string.empty())
{
// Tokenize and parse the floats
2011-11-14 14:32:11 +00:00
std::vector<std::wstring> tokens = Tokenize(string, L";");
std::vector<std::wstring>::const_iterator iter = tokens.begin();
for ( ; iter != tokens.end(); ++iter)
{
result.push_back((Gdiplus::REAL)ParseDouble((*iter).c_str(), 0.0));
}
}
return result;
}
2009-02-10 18:37:48 +00:00
int CConfigParser::ReadInt(LPCTSTR section, LPCTSTR key, int defValue)
{
2010-11-16 20:12:27 +00:00
const std::wstring& result = ReadString(section, key, L"");
2009-02-10 18:37:48 +00:00
if (!m_LastDefaultUsed)
{
const WCHAR* string = result.c_str();
if (*string == L'(')
{
double dblValue;
const WCHAR* errMsg = MathParser::CheckedParse(string, &dblValue);
if (!errMsg)
{
return (int)dblValue;
}
LogWithArgs(LOG_ERROR, L"Formula: %s in key \"%s\" in [%s]", errMsg, key, section);
}
else if (*string)
{
errno = 0;
int intValue = wcstol(string, NULL, 10);
if (errno != ERANGE)
{
return intValue;
}
}
}
return defValue;
2009-02-10 18:37:48 +00:00
}
uint32_t CConfigParser::ReadUInt(LPCTSTR section, LPCTSTR key, uint32_t defValue)
{
const std::wstring& result = ReadString(section, key, L"");
if (!m_LastDefaultUsed)
{
const WCHAR* string = result.c_str();
if (*string == L'(')
{
double dblValue;
const WCHAR* errMsg = MathParser::CheckedParse(string, &dblValue);
if (!errMsg)
{
return (uint32_t)dblValue;
}
LogWithArgs(LOG_ERROR, L"Formula: %s in key \"%s\" in [%s]", errMsg, key, section);
}
else if (*string)
{
errno = 0;
uint32_t uintValue = wcstoul(string, NULL, 10);
if (errno != ERANGE)
{
return uintValue;
}
}
}
return defValue;
}
uint64_t CConfigParser::ReadUInt64(LPCTSTR section, LPCTSTR key, uint64_t defValue)
{
const std::wstring& result = ReadString(section, key, L"");
if (!m_LastDefaultUsed)
{
const WCHAR* string = result.c_str();
if (*string == L'(')
{
double dblValue;
const WCHAR* errMsg = MathParser::CheckedParse(string, &dblValue);
if (!errMsg)
{
return (uint64_t)dblValue;
}
LogWithArgs(LOG_ERROR, L"Formula: %s in key \"%s\" in [%s]", errMsg, key, section);
}
else if (*string)
{
errno = 0;
uint64_t uint64Value = _wcstoui64(string, NULL, 10);
if (errno != ERANGE)
{
return uint64Value;
}
}
}
return defValue;
}
double CConfigParser::ReadFloat(LPCTSTR section, LPCTSTR key, double defValue)
{
2010-11-16 20:12:27 +00:00
const std::wstring& result = ReadString(section, key, L"");
if (!m_LastDefaultUsed)
{
double value;
const WCHAR* string = result.c_str();
if (*string == L'(')
{
const WCHAR* errMsg = MathParser::CheckedParse(string, &value);
if (!errMsg)
{
return value;
}
LogWithArgs(LOG_ERROR, L"Formula: %s in key \"%s\" in [%s]", errMsg, key, section);
}
else if (*string)
{
errno = 0;
value = wcstod(string, NULL);
if (errno != ERANGE)
{
return value;
}
}
}
return defValue;
}
2011-07-07 23:25:45 +00:00
// Returns true if the formula was read successfully, false for failure.
2012-03-09 10:41:46 +00:00
bool CConfigParser::ParseFormula(const std::wstring& formula, double* resultValue)
{
// Formulas must be surrounded by parenthesis
2012-03-22 21:16:41 +00:00
if (!formula.empty() && formula[0] == L'(' && formula[formula.size() - 1] == L')')
{
const WCHAR* string = formula.c_str();
const WCHAR* errMsg = MathParser::CheckedParse(string, resultValue);
if (errMsg != NULL)
{
LogWithArgs(LOG_ERROR, L"Formula: %s: %s", errMsg, string);
2011-07-07 23:25:45 +00:00
return false;
}
2011-07-07 23:25:45 +00:00
return true;
}
2011-07-07 23:25:45 +00:00
return false;
}
2011-11-28 14:13:20 +00:00
ARGB CConfigParser::ReadColor(LPCTSTR section, LPCTSTR key, ARGB defValue)
2009-02-10 18:37:48 +00:00
{
2010-11-16 20:12:27 +00:00
const std::wstring& result = ReadString(section, key, L"");
2009-02-10 18:37:48 +00:00
2010-11-16 20:12:27 +00:00
return (m_LastDefaultUsed) ? defValue : ParseColor(result.c_str());
2009-02-10 18:37:48 +00:00
}
Rect CConfigParser::ReadRect(LPCTSTR section, LPCTSTR key, const Rect& defValue)
{
const std::wstring& result = ReadString(section, key, L"");
return (m_LastDefaultUsed) ? defValue : ParseRect(result.c_str());
}
RECT CConfigParser::ReadRECT(LPCTSTR section, LPCTSTR key, const RECT& defValue)
{
const std::wstring& result = ReadString(section, key, L"");
2011-11-24 00:30:56 +00:00
RECT r;
if (m_LastDefaultUsed)
{
r = defValue;
}
else
{
r = ParseRECT(result.c_str());
}
return r;
}
/*
** Splits the string from the delimiters
**
** http://www.digitalpeer.com/id/simple
*/
std::vector<std::wstring> CConfigParser::Tokenize(const std::wstring& str, const std::wstring& delimiters)
{
std::vector<std::wstring> tokens;
2011-03-29 19:21:57 +00:00
std::wstring::size_type lastPos = str.find_first_not_of(delimiters, 0); // skip delimiters at beginning.
std::wstring::size_type pos = str.find_first_of(delimiters, lastPos); // find first "non-delimiter".
while (std::wstring::npos != pos || std::wstring::npos != lastPos)
{
2011-03-29 19:21:57 +00:00
tokens.push_back(str.substr(lastPos, pos - lastPos)); // found a token, add it to the vector.
lastPos = str.find_first_not_of(delimiters, pos); // skip delimiters. Note the "not_of"
pos = str.find_first_of(delimiters, lastPos); // find next "non-delimiter"
}
return tokens;
}
2011-11-04 12:48:03 +00:00
/*
** Trims empty element in vector and white-space in each string.
**
*/
void CConfigParser::Shrink(std::vector<std::wstring>& vec)
{
if (!vec.empty())
2011-11-04 12:48:03 +00:00
{
2011-11-10 13:44:19 +00:00
std::vector<std::wstring>::reverse_iterator iter = vec.rbegin();
while (iter != vec.rend())
2011-11-04 12:48:03 +00:00
{
std::wstring::size_type pos = (*iter).find_first_not_of(L" \t\r\n");
if (pos != std::wstring::npos)
{
std::wstring::size_type lastPos = (*iter).find_last_not_of(L" \t\r\n");
if (pos != 0 || lastPos != ((*iter).size() - 1))
{
// Trim white-space
(*iter).assign((*iter), pos, lastPos - pos + 1);
}
++iter;
}
else
{
// Remove empty element
2011-11-10 13:44:19 +00:00
vec.erase((++iter).base());
2011-11-04 12:48:03 +00:00
}
}
}
}
/*
** Helper method that parses the floating-point value from the given string.
** If the given string is invalid format or causes overflow/underflow, returns given default value.
**
*/
double CConfigParser::ParseDouble(LPCTSTR string, double defValue)
{
assert(string);
double value;
if (*string == L'(')
{
const WCHAR* errMsg = MathParser::CheckedParse(string, &value);
if (!errMsg)
{
return value;
}
LogWithArgs(LOG_ERROR, L"Formula: %s: %s", errMsg, string);
}
else if (*string)
{
errno = 0;
double value = wcstod(string, NULL);
if (errno != ERANGE)
{
return value;
}
}
return defValue;
}
/*
** Helper method that parses the integer value from the given string.
** If the given string is invalid format or causes overflow/underflow, returns given default value.
**
*/
int CConfigParser::ParseInt(LPCTSTR string, int defValue)
{
assert(string);
if (*string == L'(')
{
double dblValue;
const WCHAR* errMsg = MathParser::CheckedParse(string, &dblValue);
if (!errMsg)
{
return (int)dblValue;
}
LogWithArgs(LOG_ERROR, L"Formula: %s: %s", errMsg, string);
}
else if (*string)
{
errno = 0;
int intValue = wcstol(string, NULL, 10);
if (errno != ERANGE)
{
return intValue;
}
}
return defValue;
}
/*
** Helper method that parses the unsigned integer value from the given string.
** If the given string is invalid format or causes overflow/underflow, returns given default value.
**
*/
uint32_t CConfigParser::ParseUInt(LPCTSTR string, uint32_t defValue)
{
assert(string);
if (*string == L'(')
{
double dblValue;
const WCHAR* errMsg = MathParser::CheckedParse(string, &dblValue);
if (!errMsg)
{
return (uint32_t)dblValue;
}
LogWithArgs(LOG_ERROR, L"Formula: %s: %s", errMsg, string);
}
else if (*string)
{
errno = 0;
uint32_t uintValue = wcstoul(string, NULL, 10);
if (errno != ERANGE)
{
return uintValue;
}
}
return defValue;
}
/*
** Helper method that parses the 64bit unsigned integer value from the given string.
** If the given string is invalid format or causes overflow/underflow, returns given default value.
**
*/
uint64_t CConfigParser::ParseUInt64(LPCTSTR string, uint64_t defValue)
{
assert(string);
if (*string == L'(')
{
double dblValue;
const WCHAR* errMsg = MathParser::CheckedParse(string, &dblValue);
if (!errMsg)
{
return (uint64_t)dblValue;
}
LogWithArgs(LOG_ERROR, L"Formula: %s: %s", errMsg, string);
}
else if (*string)
{
errno = 0;
uint64_t uint64Value = _wcstoui64(string, NULL, 10);
if (errno != ERANGE)
{
return uint64Value;
}
}
return defValue;
}
2009-02-10 18:37:48 +00:00
/*
** Helper template that parses four comma separated values from the given string.
2009-02-10 18:37:48 +00:00
**
*/
template <typename T>
bool ParseInt4(LPCTSTR string, T& v1, T& v2, T& v3, T& v4)
2009-02-10 18:37:48 +00:00
{
2011-07-07 23:25:45 +00:00
if (wcschr(string, L','))
2009-02-10 18:37:48 +00:00
{
WCHAR* parseSz = _wcsdup(string);
WCHAR* token;
token = wcstok(parseSz, L",");
2011-07-07 23:25:45 +00:00
if (token)
2009-02-10 18:37:48 +00:00
{
v1 = CConfigParser::ParseInt(token, 0);
2011-11-24 00:30:56 +00:00
token = wcstok(NULL, L",");
if (token)
{
v2 = CConfigParser::ParseInt(token, 0);
2011-11-24 00:30:56 +00:00
token = wcstok(NULL, L",");
if (token)
{
v3 = CConfigParser::ParseInt(token, 0);
2011-11-24 00:30:56 +00:00
token = wcstok(NULL, L",");
if (token)
{
v4 = CConfigParser::ParseInt(token, 0);
2011-11-24 00:30:56 +00:00
}
}
}
2009-02-10 18:37:48 +00:00
}
free(parseSz);
return true;
2011-03-29 19:21:57 +00:00
}
return false;
}
/*
** Helper method that parses the color values from the given string.
** The color can be supplied as three/four comma separated values or as one
** hex-value.
**
*/
ARGB CConfigParser::ParseColor(LPCTSTR string)
{
int R = 255, G = 255, B = 255, A = 255;
if (!ParseInt4(string, R, G, B, A))
2009-02-10 18:37:48 +00:00
{
if (wcsncmp(string, L"0x", 2) == 0)
{
2011-07-07 23:25:45 +00:00
string += 2; // skip prefix
2009-02-10 18:37:48 +00:00
}
2011-07-07 23:25:45 +00:00
size_t len = wcslen(string);
if (len >= 8 && !iswspace(string[6]))
2009-02-10 18:37:48 +00:00
{
swscanf(string, L"%02x%02x%02x%02x", &R, &G, &B, &A);
2011-03-29 19:21:57 +00:00
}
2011-07-07 23:25:45 +00:00
else if (len >= 6)
2009-02-10 18:37:48 +00:00
{
swscanf(string, L"%02x%02x%02x", &R, &G, &B);
}
}
2011-11-24 00:30:56 +00:00
return Color::MakeARGB(A, R, G, B);
2009-02-10 18:37:48 +00:00
}
/*
** Helper method that parses the Gdiplus::Rect values from the given string.
** The rect can be supplied as four comma separated values (X/Y/Width/Height).
**
*/
Rect CConfigParser::ParseRect(LPCTSTR string)
{
Rect r;
ParseInt4(string, r.X, r.Y, r.Width, r.Height);
return r;
}
/*
** Helper method that parses the RECT values from the given string.
** The rect can be supplied as four comma separated values (left/top/right/bottom).
**
*/
RECT CConfigParser::ParseRECT(LPCTSTR string)
{
RECT r = {0};
ParseInt4(string, r.left, r.top, r.right, r.bottom);
return r;
}
2012-04-06 12:29:41 +00:00
/*
** Reads the given ini file and fills the m_Values and m_Keys maps.
2011-03-29 19:21:57 +00:00
**
*/
2012-05-21 11:19:25 +00:00
void CConfigParser::ReadIniFile(const std::wstring& iniFile, LPCTSTR config, int depth)
{
if (depth > 100) // Is 100 enough to assume the include loop never ends?
{
2011-09-24 13:10:31 +00:00
MessageBox(NULL, GetString(ID_STR_INCLUDEINFINITELOOP), APPNAME, MB_OK | MB_TOPMOST | MB_ICONERROR);
return;
}
// Verify whether the file exists
if (_waccess(iniFile.c_str(), 0) == -1)
{
LogWithArgs(LOG_ERROR, L"Unable to read file: %s", iniFile.c_str());
return;
}
// Avoid "IniFileMapping"
2011-11-10 13:44:19 +00:00
std::wstring iniRead = CSystem::GetTemporaryFile(iniFile);
bool temporary = (!iniRead.empty() && (iniRead.size() != 1 || iniRead[0] != L'?'));
if (temporary)
{
if (Rainmeter->GetDebug()) LogWithArgs(LOG_DEBUG, L"Reading file: %s (Temp: %s)", iniFile.c_str(), iniRead.c_str());
}
else
{
if (Rainmeter->GetDebug()) LogWithArgs(LOG_DEBUG, L"Reading file: %s", iniFile.c_str());
iniRead = iniFile;
}
// Get all the sections (i.e. different meters)
std::list<std::wstring> sections;
2011-12-04 22:18:40 +00:00
std::unordered_set<std::wstring> unique;
2011-12-09 03:28:19 +00:00
std::wstring key, value; // buffer
2011-12-04 22:18:40 +00:00
2011-07-07 10:48:42 +00:00
DWORD itemsSize = MAX_LINE_LENGTH;
WCHAR* items = new WCHAR[itemsSize];
WCHAR* pos = NULL;
WCHAR* epos = NULL;
if (config == NULL)
{
// Get all the sections
do
{
items[0] = 0;
DWORD res = GetPrivateProfileSectionNames(items, itemsSize, iniRead.c_str());
if (res == 0) // File not found
{
delete [] items;
if (temporary) CSystem::RemoveFile(iniRead);
return;
}
2011-07-07 10:48:42 +00:00
if (res < itemsSize - 2) // Fits in the buffer
{
epos = items + res;
break;
}
delete [] items;
2011-07-07 10:48:42 +00:00
itemsSize *= 2;
items = new WCHAR[itemsSize];
}
while (true);
// Read the sections
pos = items;
while (pos < epos)
{
if (*pos)
{
2011-12-09 03:28:19 +00:00
value = pos; // section name
2012-05-19 15:16:04 +00:00
StrToUpperC(key.assign(value));
2011-12-09 03:28:19 +00:00
if (unique.insert(key).second)
{
2011-12-09 03:28:19 +00:00
if (m_FoundSections.insert(key).second)
2011-12-04 22:18:40 +00:00
{
2011-12-09 03:28:19 +00:00
m_Sections.push_back(value);
2011-12-04 22:18:40 +00:00
}
2011-12-09 03:28:19 +00:00
sections.push_back(value);
}
2011-12-09 03:28:19 +00:00
pos += value.size() + 1;
}
else // Empty string
{
++pos;
}
}
}
else
{
// Special case: Read only "Rainmeter" and specified section from "Rainmeter.ini"
2011-11-12 15:36:05 +00:00
const std::wstring strRainmeter = L"Rainmeter";
const std::wstring strConfig = config;
sections.push_back(strRainmeter);
sections.push_back(strConfig);
2011-07-07 10:48:42 +00:00
if (depth == 0) // Add once
{
2011-11-12 15:36:05 +00:00
m_Sections.push_back(strRainmeter);
m_Sections.push_back(strConfig);
}
}
// Read the keys and values
std::list<std::wstring>::const_iterator iter = sections.begin();
for ( ; iter != sections.end(); ++iter)
{
2011-12-04 22:18:40 +00:00
unique.clear();
2011-11-16 16:47:20 +00:00
const WCHAR* sectionName = (*iter).c_str();
bool isVariables = (_wcsicmp(sectionName, L"Variables") == 0);
2011-12-04 22:18:40 +00:00
bool isMetadata = (config == NULL && !isVariables && _wcsicmp(sectionName, L"Metadata") == 0);
2011-07-07 10:48:42 +00:00
// Read all "key=value" from the section
do
{
items[0] = 0;
2011-11-16 16:47:20 +00:00
DWORD res = GetPrivateProfileSection(sectionName, items, itemsSize, iniRead.c_str());
2011-07-07 10:48:42 +00:00
if (res < itemsSize - 2) // Fits in the buffer
{
epos = items + res;
break;
}
delete [] items;
2011-07-07 10:48:42 +00:00
itemsSize *= 2;
items = new WCHAR[itemsSize];
}
while (true);
pos = items;
while (pos < epos)
{
if (*pos)
{
2011-11-12 15:36:05 +00:00
size_t len = wcslen(pos);
WCHAR* sep = wmemchr(pos, L'=', len);
if (sep != NULL && sep != pos)
{
2011-11-12 15:36:05 +00:00
size_t clen = sep - pos; // key's length
2012-05-19 15:16:04 +00:00
StrToUpperC(key.assign(pos, clen));
2011-12-04 22:18:40 +00:00
if (unique.insert(key).second)
{
2011-11-12 15:36:05 +00:00
++sep;
clen = len - (clen + 1); // value's length
2011-07-07 10:48:42 +00:00
// Trim surrounded quotes from value
2011-12-04 22:18:40 +00:00
if (clen >= 2 && (sep[0] == L'"' || sep[0] == L'\'') && sep[clen - 1] == sep[0])
2011-07-07 10:48:42 +00:00
{
2011-11-12 15:36:05 +00:00
clen -= 2;
++sep;
2011-07-07 10:48:42 +00:00
}
2012-05-19 18:18:52 +00:00
if (wcsncmp(key.c_str(), L"@INCLUDE", 8) == 0)
2011-07-07 10:48:42 +00:00
{
2011-12-09 03:28:19 +00:00
if (clen > 0)
2011-07-07 10:48:42 +00:00
{
2011-12-09 03:28:19 +00:00
value.assign(sep, clen);
ReadVariables();
ReplaceVariables(value);
if (!CSystem::IsAbsolutePath(value))
{
2012-05-21 11:19:25 +00:00
// Relative to the ini folder
value.insert(0, CRainmeter::ExtractPath(iniFile));
2011-12-09 03:28:19 +00:00
}
2012-05-21 11:19:25 +00:00
ReadIniFile(value, config, depth + 1);
2011-07-07 10:48:42 +00:00
}
}
else
{
2011-11-05 09:01:06 +00:00
if (!isMetadata) // Uncache Metadata's key-value pair in the skin
{
2011-12-09 03:28:19 +00:00
value.assign(sep, clen);
2011-11-05 09:01:06 +00:00
SetValue((*iter), key, value);
2011-07-07 23:25:45 +00:00
2011-12-04 22:18:40 +00:00
if (isVariables)
{
m_ListVariables.push_back(key);
}
2011-07-07 23:25:45 +00:00
}
2011-07-07 10:48:42 +00:00
}
}
}
2011-07-07 10:48:42 +00:00
pos += len + 1;
}
else // Empty string
{
++pos;
}
}
}
2011-12-04 22:18:40 +00:00
delete [] items;
if (temporary) CSystem::RemoveFile(iniRead);
}
2012-04-06 12:29:41 +00:00
/*
** Sets the value for the key under the given section.
2011-03-29 19:21:57 +00:00
**
*/
2011-07-07 23:25:45 +00:00
void CConfigParser::SetValue(const std::wstring& strSection, const std::wstring& strKey, const std::wstring& strValue)
{
// LogWithArgs(LOG_DEBUG, L"[%s] %s=%s (size: %i)", strSection.c_str(), strKey.c_str(), strValue.c_str(), (int)m_Values.size());
2011-12-04 22:18:40 +00:00
std::wstring strTmp;
strTmp.reserve(strSection.size() + 1 + strKey.size());
2011-12-09 19:49:06 +00:00
strTmp = strSection;
2011-12-04 22:18:40 +00:00
strTmp += L'~';
2011-07-07 23:25:45 +00:00
strTmp += strKey;
2010-11-25 22:00:34 +00:00
2012-05-19 15:16:04 +00:00
m_Values[StrToUpperC(strTmp)] = strValue;
}
2012-04-06 12:29:41 +00:00
/*
** Deletes the value for the key under the given section.
**
*/
void CConfigParser::DeleteValue(const std::wstring& strSection, const std::wstring& strKey)
{
2011-12-04 22:18:40 +00:00
std::wstring strTmp;
strTmp.reserve(strSection.size() + 1 + strKey.size());
2011-12-09 19:49:06 +00:00
strTmp = strSection;
2011-12-04 22:18:40 +00:00
strTmp += L'~';
strTmp += strKey;
2012-05-19 15:16:04 +00:00
std::unordered_map<std::wstring, std::wstring>::const_iterator iter = m_Values.find(StrToUpperC(strTmp));
if (iter != m_Values.end())
{
m_Values.erase(iter);
}
}
2012-04-06 12:29:41 +00:00
/*
** Returns the value for the key under the given section.
2011-03-29 19:21:57 +00:00
**
*/
const std::wstring& CConfigParser::GetValue(const std::wstring& strSection, const std::wstring& strKey, const std::wstring& strDefault)
{
2011-12-04 22:18:40 +00:00
std::wstring strTmp;
strTmp.reserve(strSection.size() + 1 + strKey.size());
2011-12-09 19:49:06 +00:00
strTmp = strSection;
2011-12-04 22:18:40 +00:00
strTmp += L'~';
2010-11-25 22:00:34 +00:00
strTmp += strKey;
2012-05-19 15:16:04 +00:00
std::unordered_map<std::wstring, std::wstring>::const_iterator iter = m_Values.find(StrToUpperC(strTmp));
2011-12-04 22:18:40 +00:00
return (iter != m_Values.end()) ? (*iter).second : strDefault;
}